Challenger Group Ltd - Balers, Woodshaving Balers, Straw Balers, Hay Balers

Challenger LMS
1 Warwick Street
Hull
HU9 1ET, United Kingdom
Tel: +44 (0)1482 224404
Fax: +44 (0)1482 210808
Sales Contact: Richard Green or John Sanderson

CHALLENGER LMS
Specialists Manufacturers of Waste Handling Machinery Range

Universal Baler UNIVERSAL BALER
A full range of Universal Balers are manufactured to handle woodshavings, chopped straw, chopped hay and shredded paper. Machines are individually designed to enable various bale sizes and production through-put to be catered for. A typical 22kW machine will produce a 25kg bale, process approximately 3.0 Tonnes of material per hour and achieve a compression ratio of approximately 5:1. All machines are fully automated, PLC controlled and in compliance with current European legislation.

20 / 25 KG WOODSHAVING BALERS

20 / 25 KG Woodshaving Baler Challenger has now been manufacturing woodshavings balers and associated equipment since 1991. The most popular machine within this range is the 20 / 25 kg woodshavings baler and there are well over 150 such machines throughout the World. Not only do we offer the standard 20 / 25 kilogram balers, we also manufacture pet pack balers, 200 kilogram balers, conveyors, dust extraction screens, automatic polythene packaging machines and complete manufacturing systems. The balers have been designed to lend themselves to customisation and they have been used to re-package wood chip, saw dust, shredded paper, shredded card, chopped straw, chopped hay, Haylage and ground coconut husk in the past.

Please take a look at our second hand Baler lists List1 List2 List3 List4

Not only do Challenger offer the standard 20 / 25 kilogram balers, we also manufacture pet pack balers, 200 kilogram balers, conveyors, dust extraction screens, automatic polythene packaging machines and complete manufacturing systems.

Rotary Dust Extraction Screen 200 KG Wood shaving Baler Finished Bale on a Forklift Truck

Pet Pack Baler PET PACK BALER
The Pet Pack Baler has been specifically designed to satisfy the requirement of pet shop suppliers for the packaging of bedding material. It can handle woodshavings, chopped straw, chopped hay and shredded paper. The machine can be manufactured to produce bales of various sizes to suit your requirements. The unit is free standing, compact and is fitted with a modern Programmable Logic Controller for fully automatic operation.

TURN KEY SOLUTIONS
Full woodshavings handling systems can be provided including Augers, Belt Conveyors, Rotary Screens, Feed Hoppers and Scraper Chain Conveyors through our mechanical handling division CHALLENGER MALPA.

DRUM CRUSHERS
Both Vertical and Horizontal Drum Crushers are manufactured to crush 25 litre and 205 litre steel drums to a fraction of their original volume. This achieves a more manageable size for recycling, transportation and landfill disposal. Crushers can be manufactured to handle both full and empty drums. For full drums a large hole is punctured into the base of the drum. The drum is then crushed forcing the contents out through the base into a skip below. The crushed drum is then ejected into a second skip for landfill/recycling.

Vertical Drum Crusher Horizontal Drum Crusher

Machines can be flame-proofed to meet various standards so as to meet the requirements of chemical, paint and waste management industries. Manual, Electric or Automated Controls can be provided fully dependant on operational requirements. In-feed and out-feed conveyors can be manufactured by our mechanical handling division CHALLENGER MALPA, allowing total schemes to be proposed and installed.

Large Engine Crusher ENGINE CRUSHERS
A range of engine crushers are manufactured to handle vehicle engines and gearboxes and reduce them to small particles. Standard engine crushers have been developed to separate the aluminium from the steel to simplify sorting. Fully automatic cycles and manual override controls are provided for convenience. The engine crushers are designed and developed to meet the exacting standards required in the scrap industry and have replaceable wear plates for convenience. A wide variety of optional equipment is available on request.

SPECIALIST WASTE COMPACTION EQUIPMENT
A full design and manufacturing service is offered where a non-standard machine is required to solve a particular waste handling problem. Recent projects of this nature have been successfully completed for many companies including Nissan Motor Manufacturing, Rolls Royce Nuclear Division and Shanks & McEwan.

For more information please click one of the following links;