Automatic Air De-denter
The Challenger Drumtech Automatic Air De-denter is designed to de-dent standard 205 litre capacity steel drums.
It is a fully automatic machine with an in feed and discharge for a horizontal roll-through operation. The doors are interlocked so that operation will not proceed unless both of the doors are closed.
Technical Information
Production rate – 100 drums per hour
Electrical supply – 400/3/50 VAC
Environmental protection – IP55
Power requirement – 4.0 kW
Compressed air pressure – 4.5 Bar
Dimensions – 1.7 m x 2.8 m x 1.8 m
The machine is designed to take a maximum load of 1500kg and is fully enclosed within a safety interlocked caged area fitted with polycarbonate panels and is portable via forklift truck. A standard specification control…
This used Cormall HDH770 Hammer Mill / Chopper Fan is in good used condition has hardly been used since the internals were refurbished last year. This Hammer Mill / Chopper Fan is now for sale…
A Challenger Handling Ltd manufactured drum cabinet washer for sale for internally cleaning drums / containers up to 205 litre capacity. The machine consists of a cold-water recirculated wash (Wash detergent can be added) on…
A used Challenger Baler with a holding hopper feeder and form fill and seal unit is for sale. This automatic machinery consists of an inclined holding hopper twin screw feeder, a weighing feed hopper, a…
CHALLENGER AUTOMATIC GLASS BOTTLE PULVERISING SYSTEM System includes : - Automatic system added in 2016 Auto bin tipper for 240L or 360L wheely bins Bin tipper in safety interlocked cage Steel slat belt feed conveyor…
This ‘entry level’ baler is in a good used condition and has the following outline specification; - 11 kW (15 HP) 400/3/50 VAC electric motor driven hydraulic power unit - Single ram with a maximum…
We have for sale a full shavings transport system for sale. The equipment is available as part system or individual components and includes the following: ALL REASONABLE OFFERS WILL BE CONSIDERED. 4-off holding hoppers /…
Originally manufactured and installed by Challenger Handling limited in 2002 and includes the following: Volumetric baler c/w 30kW hydraulic power unit and controls. Inclined Ø500mm x 9-metre nominal tubular screw feed conveyor. Rotary dust extraction…
Haylage Baling System
SOLD!
A second hand Challenger Haylage Baling System is for sale The system was manufactured by Challenger and installed in September 2011; it is designed to break down large, rectangular field bales of haylage and re-bale…
Used Pet Baler for sale
SOLD!
This baler could be used to produce bales in wood shavings, sawdust wood chip, and other short strand chopped materials such as straw, hay, haylage, etc. It was manufactured in circa 2012. It is powered…
