IBC SINGLE WASH STATION

The Challenger Drumtech IBC single Wash Station has been developed to wash individual IBC’s where production volumes are relatively low. This Wash Station comes complete with a high pressure industrial stove enamelled wash cabinet capable of delivery up to 14 litres per minute at up to 150 Bar pressure and rated for 8 hour duty. A siphon tube with valve control enables a detergent to be fed from a local container during the washing cycle. This can be set via a separate timer to give an initial timed detergent dose and a final wash can then be completed for another set timed period using fresh water. The main timer can either be positioned within the cabinet or on the front to customer preference.
A pneumatically operated control panel is provided and it comes complete with indicator showing wash in operation and an indication of wash time complete. Buttons are fitted for the time cycle
start and emergency stop. A hand operated valve controls the lowering and lifting of the wash head and a selector switch selects the internal IBC wash head or hand lance for manual external wash. The cleaning head is attached to a mount on the cylinder and incorporates a rotating, driven, high pressure wash head. This has a cyclic motion to give full coverage on the internal surface of the container. The support gantry can be supplied either wall mounted or floor mounted and incorporates a sturdy frame to which is mounted a rod-less pneumatic cylinder.
Technical Information
Production rate  – Up to ten IBC’s per hour
Electrical supply  – 400/3/50 VAC
Environmental protection  – IP55
Compressed air pressure  – 6 Bar
Microsoft Word - IBC single wash stationMicrosoft Word - IBC single wash station
Request more information or a quote
This used Cormall HDH770 Hammer Mill / Chopper Fan is in good used condition has hardly been used since the internals were refurbished last year. This Hammer Mill / Chopper Fan is now for sale…
A Challenger Handling Ltd manufactured drum cabinet washer for sale for internally cleaning drums / containers up to 205 litre capacity. The machine consists of a cold-water recirculated wash (Wash detergent can be added) on…
A used Challenger Baler with a holding hopper feeder and form fill and seal unit is for sale. This automatic machinery consists of an inclined holding hopper twin screw feeder, a weighing feed hopper, a…
CHALLENGER AUTOMATIC GLASS BOTTLE PULVERISING SYSTEM System includes : - Automatic system added in 2016 Auto bin tipper for 240L or 360L wheely bins Bin tipper in safety interlocked cage Steel slat belt feed conveyor…
We have a pre-used and stripped down SSI 2400 E shredder available for sale. This shredder is in need of some TLC and has been stripped down ready for refurbishment or it can be used for spare…
This ‘entry level’ baler is in a good used condition and has the following outline specification; - 11 kW (15 HP) 400/3/50 VAC electric motor driven hydraulic power unit - Single ram with a maximum…
We have for sale a full shavings transport system for sale. The equipment is available as part system or individual components and includes the following: ALL REASONABLE OFFERS WILL BE CONSIDERED. 4-off holding hoppers /…
Originally manufactured and installed by Challenger Handling limited in 2002 and includes the following: Volumetric baler c/w 30kW hydraulic power unit and controls. Inclined Ø500mm x 9-metre nominal tubular screw feed conveyor. Rotary dust extraction…
A second hand Challenger Haylage Baling System is for sale The system was manufactured by Challenger and installed in September 2011; it is designed to break down large, rectangular field bales of haylage and re-bale…
This baler could be used to produce bales in wood shavings, sawdust wood chip, and other short strand chopped materials such as straw, hay, haylage, etc. It was manufactured in circa 2012. It is powered…