Barrel Hoists
Barrel Hoists

Challenger barrel hoists are designed to lift or lower barrels and cylindrical objects between floors in public houses, licensed premises, restaurants or wherever there is a need to move items between floors.

Designed for simplicity of operation and minimum maintenance the lift requires only a 240 volt single phase supply and is operated by means of constant pressure push buttons therefore giving full control during any part of the operating cycle.

The drive is provided using a braked motor interlinked to a sprocket assembly with twin chains to ensure equal distribution of the load. The load is supported by two cantilevered steel arms supported by the main frame.

The Challenger barrel hoist is ideal for handling awkward products such as beer kegs, drums and gas cylinders from platform to cellar and can be supplied with an attachment to enable the barrel hoist to handle crates.

Challenger Barrel Hoists comply with current European Machinery Regulations and are supplied with a C E mark and an operation manual.

With the installation of a Challenger barrel hoist the risk of injury to personnel through manual handling is removed thus providing a safe working environment.

Beer Barrel hoist
Designed for simplicity of operation and minimum of maintenance the lift requires only a single phase 240V supply and is controlled safely by a push button function, the lifting and lowering operation stops on release of the button hence giving full control of the product position at any time during the cycle. Drive is by means of a braked motor interlinked by a common shaft and sprocket arrangement to twin drive chains for equal distribution of the product load, which in turn is completely supported from two steel arms cantilevered from the main support frame.
The Challenger hoist is ideal for handling the awkward shaped product such as beer kegs, drums and gas cylinders from platform to cellar or lorry to ground level, thus reducing the
manual handling requirements. Each unit can be designed and manufactured to suit specific height requirements at our Yorkshire based factory, and meets the current European directive 90/269/EEC for Health & Safety for the manual handling of loads.

    Request more information or a quote
    This machinery consists of a stand-alone bale breaker manufactured by Simon Eggleston (pre 2008) with integrated outfeed conveyor. This machine has been developed to break down large bulk bales into loose material for further processing.…
    A used Challenger Rotary Dust extraction screen. This machine consists of a standard Challenger (circa 2008) rotary dust extraction screen with an integrated dust auger. This machine has been developed to provide the effective removal…
    This automatic machinery consists of a standard Challenger (circa 2007) baler with integrated weigh hopper, load, compress, door and eject hydraulic functions and local operator control panel. The baler is supplied with a 2x 30-kW…
    The machine is designed to take a maximum load of 1500kg and is fully enclosed within a safety interlocked caged area fitted with polycarbonate panels and is portable via forklift truck. A standard specification control…
    A Challenger Handling Ltd manufactured drum cabinet washer for sale for internally cleaning drums / containers up to 205 litre capacity. The machine consists of a cold-water recirculated wash (Wash detergent can be added) on…
    This used Cormall HDH770 Hammer Mill / Chopper Fan is in good used condition has hardly been used since the internals were refurbished last year. This Hammer Mill / Chopper Fan is now for sale…
    This ‘entry level’ baler is in a good used condition and has the following outline specification; - 11 kW (15 HP) 400/3/50 VAC electric motor driven hydraulic power unit - Single ram with a maximum…
    A used Challenger Baler with a holding hopper feeder and form fill and seal unit is for sale. This automatic machinery consists of an inclined holding hopper twin screw feeder, a weighing feed hopper, a…
    We have for sale a full shavings transport system for sale. The equipment is available as part system or individual components and includes the following: ALL REASONABLE OFFERS WILL BE CONSIDERED. 4-off holding hoppers /…
    Originally manufactured and installed by Challenger Handling limited in 2002 and includes the following: Volumetric baler c/w 30kW hydraulic power unit and controls. Inclined Ø500mm x 9-metre nominal tubular screw feed conveyor. Rotary dust extraction…