Drum Rotator/Mixer

The Challenger Drumtech Drum Rotator / Mixer is designed to handle full 210 litre steel drums whereby the drum is securely clamped in place within a fully guarded enclosure and is rotated end over end in order to mix the contents.

The machine is designed to be loaded / unloaded using a forklift truck and when the access doors are closed an electrical safety switch will prevent operation if they are not secured or if they are opened during the cycle.

The clamping system incorporates a simple adjustable means to cater for slight variation in drum diameters. The machine is fully wired including stop / start switch, a timing device can be fitted as an optional extra and support channels are incorporated within the base to enable the machine to be easily relocated within the factory by forklift truck.

Technical Information

Electrical supply – 400/3/50 VAC

Environmental protection – IP55

Power requirement – 0.55 kW

Dimensions – 1.4 m by 1.4 m by 2.0 m

Request more information or a quote

Tick box if you would like to keep up to date with our newsletter

SECOND HAND MACHINERY

Used Challenger Baler With Holding Hopper

A used Challenger Baler with a holding hopper feeder and form fill and seal unit is for sale. This automatic machinery consists of an inclined holding hopper twin screw feeder, a weighing feed hopper, a…

Used Glass Recycling Equipment

CHALLENGER AUTOMATIC GLASS BOTTLE PULVERISING SYSTEM System includes : - Automatic system added in 2016 Auto bin tipper for 240L or 360L wheely bins Bin tipper in safety interlocked cage Steel slat belt feed conveyor…

SSI 2400 E Shredder

We have a pre-used and stripped down SSI 2400 E shredder available for sale. This shredder is in need of some TLC and has been stripped down ready for refurbishment or it can be used for spare…

Two Brand New Conveyor Assemblies

Two brand new belt conveyor assemblies A total of two brand new heavy duty belt conveyor assemblies are being offered for sale due to a cancelled order generally as detailed below; One-off swan neck sidewall…

Used Lindemann 250 HP Shredder

A used Lindemann 250 HP Shredder and discharge conveyor is for sale. Challenger has this used Lindemann Twin Shaft Shredder with an ‘Lshaped’ discharge conveyor available for immediate resale. Whilst the shredder cutting blades ideally…

Used Wood Shavings Transport Equipment SOLD!

We have for sale a full shavings transport system for sale. The equipment is available as part system or individual components and includes the following: ALL REASONABLE OFFERS WILL BE CONSIDERED. 4-off holding hoppers /…

Used Woodshavings Baling Line SOLD!

Originally manufactured and installed by Challenger Handling limited in 2002 and includes the following: Volumetric baler c/w 30kW hydraulic power unit and controls. Inclined Ø500mm x 9-metre nominal tubular screw feed conveyor. Rotary dust extraction…

Haylage Baling System SOLD!

A second hand Challenger Haylage Baling System is for sale The system was manufactured by Challenger and installed in September 2011; it is designed to break down large, rectangular field bales of haylage and re-bale…

Used Pet Baler for sale SOLD!

This baler could be used to produce bales in wood shavings, sawdust wood chip, and other short strand chopped materials such as straw, hay, haylage, etc. It was manufactured in circa 2012. It is powered…

Used Drum Expander SOLD!

We have a used drum expander available for sale. This Richmond Expander has not worked for some time but it is in a reasonable condition and is certainly heavy duty. The Expander is mounted on a…